VVDI Prog ECU programmer 2.1.0 is available in obd2express.co.uk. The VVDIProg is designed to program multi EEPROM, MCU and ECUs. It adds BMW ECU read& write and pin code calculator for multi-brand vehicle models.
Free download VVDIProg 2.1.0 software driver
https://mega.nz/#!O8UUgDDa!dEWkvUNYN9q-oMFg359faeSjyYZM5QASmeT-iAywYNY
How to install VVDIProg 2.1.0 software?
1) Install VVDIProg 2.1.0 driver
Insert DVD to computer
Open My Computer
Open VVDIProg2.1 (E:) DVD
Copy and paste VVDIProg folder to desktop
Connect the VVDI prog programmer with computer via USB port
Wait the system to found hardware wizard
Select “Install from a list of specific location (Advanced)”, click “Next”
Include this location in the search C:/Documents and
Settings/Adminnistrator/Desktop/VVDIProg/driver/ft232, click “OK” and “Next”
Click “Finish”
Install driver follow the previous instructions again
Select “Install from a list of specific location (Advanced)”, click “Next”
Click “Next”
Click “Finish”
Open My Computer>>Manager>>Device Manager>>Ports>>USB Serial Port (COM4) to check well communication is built
2) Run VVDIPROG V2.1.0 software
Open VVDIProg folder on desktop
Open VVDIProg software
Click “Language” tab to exchange language between English and Chinese
Select ECU type and chip type from the list
The VVDIProg software will prompt which cable/connector is going to be used
Click “Connection diagram” button
Click “New” tab
Click “Read”
The software will display EEPROM data
Click “Save”, save the bin file to desktop and name it 93c66, click Save
Create a new window
Select other ECU type and chip type
The system will also prompt which cable to use and the detail diagram
Select other function and follow the system prompts.